Mazda 6 Service Manual: Accelerator cable inspection/adjustment
1. Verify that the throttle valve is closed.
2. Pull the accelerator cable in the directions of A and B, and measure the free play.
- If not as specified, adjust by turning locknut C.
Free play
1.0-3.0 mm {0.04-0.11 in}Tightening torpue 9.8-14.7 N·m {100-150 kgf·cm, 87-130 in·lbf}
Accelerator pedal removal/installation
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Accelerator Cable Installation Note
Carry out the ACCELERATOR CABLE INSTALLATION/ADJUSTMENT procedure ...
Fuel system
...
Other materials:
Mazda 6 Service Manual: Rear View Monitor Operation
The operation of the rear view monitor when reversing the vehicle varies depending
on the traffic, road, and vehicle conditions. The amount of steering and the timing
also varies depending on conditions, so confirm the surrounding conditions directly
with your eyes and steer the vehicle in acc ...
Mazda 6 Service Manual: Fog Lights (Some models)
The fog lights can be turned on with the ignition switched ON and the headlights
turned on.
Use this switch to turn on the fog lights. The fog lights will improve visibility
at night and during foggy conditions.
The fog lights turn on when the fog light switch is turned to the
position and t ...