Mazda 6 Service Manual: Airflow mode actuator removal/installation
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove the car navigation unit. (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Air mix actuator inspection
1. Connect battery positive voltage to terminal D or F and ground to terminal
F or D of the air mix actuator.
2. Verify that the air mix actuator operates as shown below.
If not as specified, r ...
Airflow mode actuator inspection
1. Connect battery positive voltage to terminal D or F and ground to terminal
F or D of the airflow mode actuator.
2. Verify that the airflow mode actuator operates as shown below.
If not as sp ...
Other materials:
Mazda 6 Service Manual: Air intake actuator inspection
1. Connect battery positive voltage to terminal D or F and ground to terminal
F or D of the air intake actuator.
2. Verify that the air intake actuator operates as shown below.
If not as specified, replace the air intake actuator.
...
Mazda 6 Service Manual: Air filter inspection
1. Remove the air filter.
2. Inspect the air filter.
If the air filter is damaged, excessively dirty, or foul smelling,
replace the air filter.
Note
The air filter cannot be reused by cleaning it with water or
compressed air.
Replace the air filter at the following interval, depe ...