Mazda 6 Owners Manual: Aluminum Wheel Maintenance
A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating.
CAUTION
Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients. Otherwise, the product could discolor or stain the aluminum wheels.
NOTE
- Do not use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminum wheels. They may damage the coating.
- Always use a sponge or soft cloth to clean the wheels. Rinse the wheels thoroughly with lukewarm or cold water. Also, be sure to clean the wheels after driving on dusty or salted roads to help prevent corrosion.
- Avoid washing your vehicle in an automatic car wash that uses highspeed or hard brushes.
Underbody Maintenance
Road chemicals and salt used for ice and snow removal and solvents used for dust
control may collect on the underbody. If not removed, they will speed up rusting
and deterioration of such underbod ...
Plastic Part Maintenance
When cleaning the plastic lenses of the lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline
detergents. Otherwise, these ch ...
Other materials:
Mazda 6 Owners Manual: Instrument cluster removal/installation
Caution
When replacing the instrument cluster, the configuration procedure must be
performed before removing the instrument cluster. If the configuration procedure
is not performed before removing the instrument cluster, it is possible that the
instrument cluster will not operate normally. ...
Mazda 6 Owners Manual: Evaporator temperature sensor inspection
1. Turn the AUTO switch on.
2. Set the temperature control at MAX COLD (Turn the left).
3. Turn the A/C switch.
4. Set the RECIRCULATE mode.
5. Close all doors and windows.
6. Wait for 5 minutes.
7. Remove the glove compartment.
8. Disconnect the evaporator temperature sensor.
9. Measure t ...