Mazda 6 Owners Manual: Anchor Bracket
Anchor brackets for securing childrestraint systems are equipped in the vehicle. Locate each anchor position using the illustration.
To install a child-restraint system, remove the head restraint. Always follow the instruction manual accompanying the child-restraint system.
Anchor bracket location
Use the indicated anchor bracket locations when installing a child-restraint system equipped with a tether.
WARNING
Always attach the tether strap to the correct tether anchor position:
Attaching the tether strap to the incorrect tether anchor position is dangerous. In a collision, the tether strap could come off and loosen the child-restraint system. If the childrestraint system moves it could result in death or injury to the child.
Always remove the head restraint and install child-restraint system:
Installing a child-restraint system without removing the head restraint is dangerous. The child-restraint system cannot be installed correctly which may result in death or injury to the child in a collision.
Always install the head restraint and adjust it to the appropriate position after removing the child-restraint system:
Driving with the head restraint removed is dangerous as impact to the occupant's head cannot be prevented during emergency braking or in a collision, which could result in a serious accident, injury or death. Refer to Head Restraints.
Installing Child-Restraint Systems
Accident statistics reveal that a child is safer in the rear seat. The front
passenger's seat is clearly the worst choice for any child under 12, and with rear-facing
childrestraint systems it is ...
Using Automatic Locking Mode (Some models)
Follow these instructions when using a child-restraint system, unless you are
attaching a LATCH-equipped childrestraint system to the rear LATCH lower anchors.
Refer to “Using LATCH Lower Anchor ...
Other materials:
Mazda 6 Owners Manual: Locking, Unlocking with Request Switch, Door Handle (With the advanced keyless
function)
All doors can be locked/unlocked by pressing the request switch on the front
doors while the key is being carried.
Front doors
To lock
To lock the doors , press the request switch and the hazard warning lights will
flash once.
A beep sound will be heard once.
To unlock
Driver's door requ ...
Mazda 6 Owners Manual: Programming the HomeLink System
CAUTION
When programming a garage door opener or a gate, disconnect the power to these
devices before performing programming. Continuous operation of the devices could
damage the motor.
The HomeLink system provides 3 buttons which can be individually selected and
programmed using the transmi ...