Mazda 6 Service Manual: Assist handle removal/installation
1. Insert a screwdriver into the assist handle notch and remove the assist handle cover.
2. Pull the assist handle forward you, then remove the assist handle.
3. Install in the reverse order of removal.
Shock absorbing pad removal/installation
1. Remove the headliner.
2. Remove the fastener, then remove the shock absorbing pad.
3. Install in the reverse order of removal. ...
Sunvisor removal/installation
1. Remove the screws, then the sunvisor.
2. Disengage the center adapter (sunvisor stopper) from the body using a
fastener remover.
3. Install in the reverse order of removal. ...
Other materials:
Mazda 6 Service Manual: Refrigerant lines removal/installation
1. Remove the battery.
2. Discharge the refrigerant from the system. (See RECOVERY.) (See CHARGING.)
3. Remove the washer tank. (L.H.D. only) (See WASHER TANK
REMOVAL/INSTALLATION.)
4. Remove the air cleaner cover, air cleaner element and air cleaner case.
(See INTAKE-AIR SYSTEM
REMOVAL/INST ...
Mazda 6 Service Manual: Engine coolant temperature (ect) sensor inspection
Note
Perform the following inspection only when directed.
ECT Sensor Resistance Inspection
1. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS.)
2. Remove the ECT sensor (located above the starter).
3. Place the ECT sensor in water with a thermometer, and heat the water
gra ...