Warning
1. Remove the oil dipstick.
2. Remove the oil drain plug and washer.
3. Drain the ATF into a container.
4. Install a new washer and the drain plug.
Tightening torque 30-41 N·m {3.0-4.2 kgf·m, 22-30 ft·lbf}
5. Add the specified ATF until ATF level reaches lower notch of dipstick type of ATF through the oil filler tube.
ATF type
ATF M-V
6. Ensure that the ATF level is in the HOT range (65 °C{149 °F}).
Mazda 6 Service Manual: Closing the Hood
1. Check under the hood area to make certain all filler caps are in place and
all loose items (e.g. tools, oil containers, etc.) have been removed.
2. Lift the hood, grasp the padded area on the support rod, and secure the support
rod in the clip. Verify that the support rod is secured in the c ...
Mazda 6 Service Manual: Distance Recognition Support System (DRSS) (Some models)
The Distance Recognition Support System (DRSS) measures the distance between
your vehicle and a vehicle ahead using a radar sensor (front) while the vehicle
speed is about 30 km/h (19 mph) or faster, and if your vehicle approaches a vehicle
ahead more closely than what is appropriate for maint ...