Mazda 6 Service Manual: Bonnet adjustment
Gap Adjustment
1. Remove the front fender.
2. Loosen the bonnet hinge installation bolts and reposition the bonnet.
3. Tighten the bolts.
4. Verify that the gap between the bonnet and the body is within the specification.
Clearance
a: 2.5-4.5 mm {0.08-0.17 in}
Height Adjustment
1. Turn the stop rubber to adjust the height of the bonnet.
2. Verify that the height between the bonnet and the body is within the specification.
Clearance
a: 3.0-6.0 mm {0.12-0.23 in} b: 3.0-6.0 mm {0.12-0.23 in} c: -1.0-1.0 mm {-0.04-0.04 in}
Bonnet removal/installation
Warning
Removing the bonnet without supporting can be dangerous. The
bonnet may fall and injure you. Always perform the following procedure with
at least another person.
1. Disconnect the ...
Front fender panel
FRONT FENDER PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front side turn light.
3. Remove the fender molding. (See COWL GRILLE REMOVAL/INSTALLATION.)
4. Remo ...
Other materials:
Mazda 6 Service Manual: Manually Shifting Down
You can shift gears down by operating the selector lever or the steering shift
switches (some models).
M6 → M5 → M4 → M3 → M2→ M1
Using selector lever
To shift down to a lower gear, tap the selector lever forward (-) once.
Using steering shift switch (Some model ...
Mazda 6 Service Manual: Fuel Economy Monitor
The Control Status and Fuel Consumption are switched and displayed by operating
each icon in the display.
In addition, after completing a trip, the total energy efficiency to date is
displayed in the ending display when the ending display is turned on.
1. Select the icon on the home
screen ...