Mazda 6 Service Manual: Brake switch inspection
1. Disconnect the negative battery cable.
2. Disconnect the brake switch connector harness.
3. Inspect for continuity between the brake switch connector terminals.
- If not as specified, replace the brake switch.
Brake pedal inspection
Brake Pedal Height Inspection
Verify that the distance from the carpet to the center of the upper surface
of the pedal pad is as specified.
Pedal height (reference value)
Brake Pedal Height Adj ...
Brake pedal removal/installation
1. For ATX model, remove the lock unit with brake switch (R.H.D. only).
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Brake switch Installation Note ...
Other materials:
Mazda 6 Service Manual: Side Air Bags
The side air bags are mounted in the outboard sides of the front seatbacks.
When the air bag crash sensors detect a side impact of greater than moderate
force, the system inflates the side air bag only on the side in which the vehicle
was hit. The side air bag inflates quickly to reduce injury ...
Mazda 6 Service Manual: Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue gauge indicates that the engine
coolant temperature is low, and the red gauge indicates that the engine coolant
temperature is high and overheating.
CAUTION
If the high engine coolant temperature warning light (red) turns on, there
is a pos ...