1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of removal.
Piston Disassembly Note
Caution
1. Place a piece of wood in the caliper, then blow compressed air through the hole to force the piston out of the caliper.
Piston Seal Disassembly Note
1. Remove the piston seal from the brake caliper using the SST
.
Bleeder Screw Assembly Note
1. Assemble the bleeder screw to the caliper using the SST.
Tightening torque 6.9-9.8 N·m {71-99 kgf·cm, 62-86 in·lbf}
Mazda 6 Service Manual: Headlight bulb removal/installation
Low-beam
Halogen type
1. Disconnect the negative battery cable.
2. Disconnect the front combination light. (See FRONT COMBINATION LIGHT
REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
Caution
A halogen bulb generates extremely high heat when it is used. If
the ...
Mazda 6 Service Manual: Windshield wiper motor removal/installation
1. Disconnect the negative battery cable.
2. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND
BLADE REMOVAL/INSTALLATION.)
3. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse ord ...