The Blind Spot Monitoring (BSM) system can be set to inoperable.
When the Blind Spot Monitoring (BSM) is set to inoperable, the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems are turned off and the Blind Spot Monitoring (BSM) OFF indicator light in the instrument cluster turns on.
NOTE
If the engine is stopped while the Blind Spot Monitoring (BSM) is turned off, the Blind Spot Monitoring (BSM) becomes operable the next time the engine is started.
Mazda 6 Owners Manual: Oil seal replacement
1. Drain the ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT.)
Caution
The oil seal is easily damaged by the sharp edges of the drive
shaft splines. Do not let the splines contact the oil seal.
2. Remove the drive shaft. (See DRIVE SHAFT REMOVAL/INSTALLATION.)
3. Remove the oil sea ...
Mazda 6 Owners Manual: Dtc b1318
Caution
When attaching the tester lead to the ABS (ABS/TCS) HU/CM harness
connector, the SST (49 G066 001) must be used. (See ABS (ABS/TCS) HU/CM
INSPECTION.)
Diagnostic procedure
...