Mazda 6 Service Manual: Climate control unit inspection
Full-auto Air Conditioner
1. Connect the all center panel connectors.
2. Turn the ignition switch to ON position.
3. Measure the voltage at each climate control unit terminal and refer to the terminal voltage list.
- If not as specified, inspect the parts listed under Action and the related wiring harness.
- If there is any malfunction, replace the climate control unit.
Terminal Voltage List (Reference)
Climate control unit wire adjustment
Air Mix Wire
1. Set the temperature control dial at max cold.
2. Set the air mix link to max cold in the direction shown by the arrow and
insert a screwdriver at the set hole.
3. Connect the ai ...
Fan switch inspection
1. Remove the climate control unit.
2. Inspect for continuity between the fan switch terminals using an ohmmeter.
If not as specified, replace the fan switch.
...
Other materials:
Mazda 6 Service Manual: Power window regulator removal/installation
1. Disconnect the negative battery cable.
2. Remove the front door glass/rear door glass.
3. Remove the front door speaker/rear door speaker.
4. Remove the power window motor.
5. Remove the nuts.
6. Insert hand through the speaker installation hole, rotate the regulator
drum housing in the ...
Mazda 6 Service Manual: Rear Cross Traffic Alert (RCTA) (Some models)
The Rear Cross Traffic Alert (RCTA) system is designed to assist the driver in
checking the area to the rear of the vehicle on both sides while the vehicle is
reversing by alerting the driver to the presence of vehicles approaching the rear
of the vehicle.
The Rear Cross Traffic Alert (RCTA) ...