Mazda 6 manuals

Mazda 6 Service Manual: Console removal/installation

Mazda 6 Service Manual / Body / Dashboard and console / Console removal/installation

1. For MT vehicle, remove the shift lever knob.

2. Remove the cup holder panel using a tape-wrapped screwdriver.


3. Remove the boot panel using a tape-wrapped screwdriver, disconnect the cigarette lighter connector, and remove the front ashtray illumination.

4. Remove the bolts.

5. Install in the reverse order of removal.

Glove compartment removal/installation
1. Pull the stay damper to the direction shown in the figure. Then detach the fit for the glove compartment from the stay damper. 2. Bend the stoppers inward to remove. 3. Turn the glove compa ...

Console disassembly/assembly
1. Disassemble in the order indicated in the table. 2. Assemble in the reverse order of disassembly. ...

Other materials:

Mazda 6 Service Manual: Abs (abs/tcs) hu/cm removal/installation
Caution When replacing the ABS (ABS/TCS) HU/CM, configuration procedure must be done before removing the ABS (ABS/TCS) HU/CM. If configuration is not completed before removing the ABS (ABS/TCS) HU/CM, TCS will not work properly (with TCS model). Do not drop the ABS (ABS/TCS) HU/CM. Re ...

Mazda 6 Service Manual: Fuel-Filler Cap
To remove the fuel-filler cap, turn it counterclockwise. Attach the removed cap to the inner side of the fuel lid. To close the fuel-filler cap, turn it clockwise until a click is heard. CAUTION (U.S.A. and Canada) If the check fuel cap warning light illuminates, the fuel-filler cap may not ...

© 2016-2024 Copyright www.mazda6info.net