Mazda 6 Service Manual: Door lock timer unit id code change

Mazda 6 Service Manual / Body / Power door lock system / Door lock timer unit id code change

Note

When programming the ID code into a door lock timer unit, verify that other transmitters are not being operated in the vicinity.

Door lock timer unit inspection

1. Measure the voltage at the door lock timer unit terminals (other than terminal 1E and 2W) as indicated below. If not as specified, inspect the parts listed under Action. 2. Disconnect the ...

Transmitter battery replacement

1. Insert a small screwdriver into the slot and gently pry open the transmitter. 2. Press the portion of the battery indicated by A and remove the battery. 3. Install a new battery (CR2025) in ...

Other materials:

Mazda 6 Service Manual: Front lower arm (front) removal/installation
1. Remove in the order indicated in the table. 2. Install in the reverse order of removal. Front Lower Arm (Front) Ball Joint Removal Note Separate the ball joint from the knuckle using the SSTs. Front Lower Arm (Front) Bushing (Inner Side) Removal Note Press the bushing (inner side) out ...

Mazda 6 Service Manual: Brake/Clutch Fluid
Inspecting Brake/Clutch Fluid Level WARNING If the brake/clutch fluid level is low, have the brakes inspected: A low brake/clutch fluid level is dangerous. A low level could indicate brake lining wear or a brake system leak which could cause the brakes to fail and lead to an accident. The b ...