Caution
1. Configurate the DSC HU/CM (when only replacing it).(See ABS (ABS/TCS) or DSC HU/CM CONFIGURATION.)
2. Remove the battery, battery tray and battery tray bracket.(See BATTERY REMOVAL/INSTALLATION.)
3. Remove the under cover.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Connector Removal Note
1. Rotate the lock lever 40° to the direction A, then push the lock lever to the direction B.
Caution
2. Verify that the lock lever is completely returned.
3. Remove the harness side connector to the direction D.
DSC HU/CM and Bracket Removal/Installation Note
When removing/installing the DSC HU/CM from/to the vehicle, attach a strip of tape on the DSC HU/CM connector to prevent brake fluid from entering.
Connector Installation Note
1. Verify that the connection part and waterproof packing are free of foreign material, then connect the connector.
2. Verify that the lock lever is completely pushed in.
Mazda 6 Service Manual: Magnetic clutch disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
3. Adjust the magnetic clutch clearance. (See MAGNETIC CLUTCH ADJUSTMENT.)
Bolt Removal/Installation Note
1. When removing or installing the bolt, hold the pressure plate in place as
shown ...
Mazda 6 Service Manual: Operating the Power Windows
NOTE
Each passenger window can be operated with each door switch when the
power window lock switch on the driver's door is in the unlocked position.
Each passenger window can also be operated using the master control switches
on the driver's door.
Normal opening/closing
To open the ...