Mazda 6 Service Manual: Dtc b1342

Dtc b1318

Caution When attaching the tester lead to the ABS (ABS/TCS) HU/CM harness connector, the SST (49 G066 001) must be used. (See ABS (ABS/TCS) HU/CM INSPECTION.) Diagnostic procedure ...

Dtc c1095, c1096

Caution When attaching the tester lead to the ABS (ABS/TCS) HU/CM harnesses connector the SST (49 G066 001) must be used. (See ABS (ABS/TCS) HU/CM INSPECTION.) Diagnostic procedure ...

Other materials:

Mazda 6 Service Manual: Parking brake (lever type) adjustment
1. Start the engine and depress the brake pedal several times. 2. Stop the engine. 3. Remove the ashtray behind the center console. 4. Turn the adjusting nut as shown in the figure. 5. After adjustment, inspect the following points: (1) Turn the ignition switch to ON, pull the parking brak ...

Mazda 6 Service Manual: Noise filter inspection
Brake Light Noise Filter 1. Inspect for resistance and continuity between the noise filter terminals using an ohmmeter. If not as specified, replace the noise filter. Rear Window Defroster Noise Filter Inspect for resistance and continuity between the noise filter terminals using an ...