Mazda 6 Service Manual: Dual proportioning valve replacement (without abs)
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Dual Proportioning Valve Installation Note
Install the dual proportioning valve so that the R mark faces the left side of the vehicle.
Dual proportioning valve inspection (without abs)
1. Connect the SSTs to the brake pipes as shown in the figure.
2. Bleed the air from the brake system.
3. Measure the fluid pressure of the master cylinder and the rear brake.
If not within th ...
Front brake (disc) inspection
Brake Judder Repair Hint
Description
Brake judder concern has the following 3 characteristics:
Steering wheel vibration
Steering wheel vibrates in the direction of its rotation. This characteristi ...
Other materials:
Mazda 6 Service Manual: Antilock Brake System (ABS)
The ABS control unit continuously monitors the speed of each wheel. If one wheel
is about to lock up, the ABS responds by automatically releasing and reapplying
that wheel's brake.
The driver will feel a slight vibration in the brake pedal and may hear a chattering
noise from the brake system ...
Mazda 6 Service Manual: Front fender panel
FRONT FENDER PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front side turn light.
3. Remove the fender molding. (See COWL GRILLE REMOVAL/INSTALLATION.)
4. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
5. Remove the front combination light ...