Mazda 6 Service Manual: Dynamic stability control

Rear abs wheel-speed sensor removal/installation

1. Remove the tire house trim. (TIRE HOUSE TRIM REMOVAL/INSTALLATION.) 2. Remove in the order indicated in the table. 3. Install in the reverse order of removal. ...

Dsc system inspection

Preparation 1. Verify that the battery is fully charged. 2. With ignition switch on, verify that the ABS warning light goes out after 2.4 seconds. 3. Turn the ignition switch off. 4. On level gro ...

Other materials:

Mazda 6 Service Manual: Vehicle speedometer sensor removal/installation
Without ABS 1. Disconnect the negative battery cable. 2. Remove the battery and battery tray. 3. Remove the air cleaner compornent. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.) 4. Disconnect the vehicle speedometer sensor connector. 5. Remove the vehicle speedometer sensor. 6. Apply transmi ...

Mazda 6 Service Manual: Maintenance Monitor
The following maintenance period notifications can be displayed by turning the Maintenance Monitor on. Scheduled Maintenance Tire Rotation Oil Change For the setting method and indications for the maintenance monitor, refer to the Maintenance Monitor. The maintenance monitor displays ...