Mazda 6 Service Manual: Evaporator inspection
1. Remove the A/C unit. (See A/C UNIT REMOVAL/INSTALLATION.)
2. Remove the evaporator from the A/C unit.
3. Inspect for cracks, damage, and oil leakage.
- If any problems are found, replace the evaporator.
4. Inspect for bent fins.
- If any are bent, use a flathead screwdriver to straighten them.
Expansion valve removal/installation
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See RECOVERY.) (See CHARGING.)
Caution
If moisture or foreign material enters the refrigeration cycle,
...
Heater core inspection
1. Remove the A/C unit. (See A/C UNIT REMOVAL/INSTALLATION.)
2. Remove the heater core from the A/C unit.
3. Inspect for cracks, damage, and coolant leakage.
If any problems are found, replace t ...
Other materials:
Mazda 6 Service Manual: Windshield Wipers
Turn the wipers on by pressing the lever up or down.
With intermittent wiper
Variable-speed intermittent wipers
Set the lever to the intermittent position and choose the interval timing by
rotating the ring.
With auto-wiper control
Auto-wiper control
When the wiper lever is in the
...
Mazda 6 Service Manual: Fuse Replacement
Replacing the fuses on the vehicle's left side
If the electrical system does not work, first inspect the fuses on the vehicle's
left side.
1. Make sure the ignition is switched off, and other switches are off.
2. Open the fuse panel cover.
3. Pull the fuse straight out with the fuse puller p ...