Mazda 6 Service Manual: Front abs wheel-speed sensor removal/installation
1. Remove the mud guard.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Tcs (dsc) off switch inspection
1. Remove the TCS OFF switch.
2. Inspect for continuity between the TCS OFF switch terminals using an
ohmmeter.
If not within the specification, replace the TCS OFF switch.
...
Front/rear abs wheel-speed sensor inspection
Visual Inspection
Remove the wheel and tire, and inspect the sensor for looseness and damage.
Replace the sensor if necessary.
Clearance Inspection
Inspect the clearance between the wheel-speed s ...
Other materials:
Mazda 6 Service Manual: Barometric pressure (baro) sensor inspection
Note
Perform the following inspection only when directed.
The following vacuum values are indicated by relative pressure
from the barometric pressure sensor.
1. Connect the SSTs (WDS or equivalent) to the DLC-2.
2. Turn the ignition switch to ON.
3. Select BARO on the SSTs (WDS or equi ...
Mazda 6 Service Manual: Anchor Bracket
Anchor brackets for securing childrestraint systems are equipped in the vehicle.
Locate each anchor position using the illustration.
To install a child-restraint system, remove the head restraint. Always follow
the instruction manual accompanying the child-restraint system.
Anchor bracket loca ...