Note
1. Pull the A section upward and remove the clip.
2. Rotate the B section of the front beltline molding in direction (2), along the direction (1) shown in the figure and remove it from the body.
Mazda 6 Service Manual: Variable air duct (vad) control solenoid valve inspection (l3)
1. Remove the VAD control solenoid valve. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
2. Inspect airflow between the ports under the following conditions.
If not as specified, replace the VAD control solenoid valve.
If as specified, carry out the Circuit Open/Short Inspection.
Circ ...
Mazda 6 Service Manual: Hill Launch Assist (HLA)
Hill Launch Assist (HLA) is a function which assists the driver in accelerating
from a stop while on a slope. When the driver releases the brake pedal and depresses
the accelerator pedal while on a slope, the function prevents the vehicle from rolling.
The braking force is maintained automatic ...