Mazda 6 Service Manual: Front door key cylinder removal/installation
1. Remove the front door unit.
2. Remove the cover, then remove the bolt.
3. For protector-equipped vehicles, pull out the protector tab from the latch and remove the protector.
4. Disconnect the rod.
5. Remove the front outer handle.
6. Turn the key cylinder in the direction indicated by the arrow (1) and move the hook to the notch.
7. Pull the key cylinder towards you (2) to remove it.
8. Install in the reverse order of removal.
Rear door latch and lock actuator removal/installation
1. Remove the rear door unit.
2. Remove the screws, then remove the rear door latch and lock actuator.
3. Install in the reverse order of removal. ...
Front outer handle removal/installation
1. Remove the front door glass.
2. Detach the outer handle and front door latch rod.
3. For protector-equipped vehicles, refer to key cylinder
removal/installation to remove the protector.
4. Rem ...
Other materials:
Mazda 6 Service Manual: General procedures
Wheels and Tires Removal/Installation
The removal and installation procedures for the wheels and tires are not
mentioned in this section. When a wheel is removed, tighten it to 88-118 N·m
{9.0-12.0 kgf·m, 65.0-87.0 ft·lbf}.
Power Steering Components Removal/Installation
If any power steeri ...
Mazda 6 Service Manual: Power Window Lock Switch
This feature prevents all power windows from operating, except the driver's power
window. Keep this switch in the locked position while children are in the vehicle.
Locked position (button depressed):
Only the driver's power window can be operated.
Unlocked position (button not depressed):
All ...