Mazda 6 Service Manual: Generator removal/installation
Warning
- When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery negative cables before performing the following operation.
Caution
- The generator can be damaged by the heat from the exhaust manifold. Make sure the generator duct and the generator heat insulator are installed securely.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Remove the drive belt. (See DRIVE BELT REPLACEMENT.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Generator Removal Note
Remove the generator from above.
Battery recharging
Warning
Keep any flammable away from the battery, otherwise evaporated gas
of the battery fluid may catch fire, and cause serious injury or death.
Caution
When removing the battery, disc ...
Generator inspection
Generator Warning Light
1. Verify that the battery is fully charged.
Charge if necessary.
2. Verify that the drive belt deflection/tension is correct. (See DRIVE BELT
INSPECTION.)
If not ...
Other materials:
Mazda 6 Service Manual: Front Passenger Air Bag
The front passenger air bag is mounted in the front passenger dashboard.
The inflation mechanism for the front passenger air bag is the same as the driver's
air bag.For more details about air bag deployment, refer to "SRS Air Bag Deployment
Criteria".
(With Front Passenger Occupant Classificat ...
Mazda 6 Service Manual: Cowl panel removal/installation
1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND
BLADE REMOVAL/INSTALLATION.)
2. Remove the cowl grille.
3. Remove the windshield wiper motor. (See WINDSHIELD WIPER MOTOR
REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the re ...