Mazda 6 manuals

Mazda 6 Owners Manual: Glossary of Terms

Tire Placard:

A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry.

Tire Identification Number (TIN):

A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of manufacture.

Inflation Pressure:

A measure of the amount of air in a tire.

kPa:

Kilopascal, the metric unit for air pressure.

psi:

Pounds per square inch, the English unit for air pressure.

B-pillar:

The structural member at the side of the vehicle behind the front door.

Original Equipment (OE):

Describes components originally equipped on the vehicle.

Vehicle Load Limit:

The maximum value of the combination weight of occupants and cargo.

Bead Area of the Tire:

Area of the tire next to the rim.

Sidewall Area of the Tire:

Area between the bead area and the tread.

Tread Area of the Tire:

Area on the perimeter of the tire that contacts the road when it's mounted on the vehicle.

Seating capacity

means the total allowable number of vehicle occupants. Seating capacity is described on the tire label.

Production options weight

is the combination weight of installed regular production options weighing over 2.3 kilograms in excess of the standard items which they replace, and not previously considered in the curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.

Rim

is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated.

Checking Tire Pressure
1. When you check the air pressure, make sure the tires are cold —meaning they are not hot from driving even a mile. 2. Remove the cap from the valve on one tire. 3. Firmly press a tire gauge on ...

Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are some important maintenance points: Tire Inflation Pressure Inspect all tire pressure monthly (including the ...

Other materials:

Mazda 6 Owners Manual: No.1 abs warning light, brake system warning light, tcs off light do not illuminate with ignition switch on
Vehicle with ABS/TCS When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunction. If there is a problem, check to make sure conn ...

Mazda 6 Owners Manual: Front brake (disc) inspection
Brake Judder Repair Hint Description Brake judder concern has the following 3 characteristics: Steering wheel vibration Steering wheel vibrates in the direction of its rotation. This characteristic is most noticeable when applying brakes at a vehicle speed of 100-140 km/h {62.1-86.8 mph}. F ...

© 2016-2024 Copyright www.mazda6info.net