Mazda 6 Service Manual: Inner handle removal/installation
1. Remove the front door trim.
2. Using a flathead screwdriver, press and hold the hook in the direction indicated by arrow (1), and pull the shaft in the direction indicated by arrow (2), remove the shaft.
3. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
4. Install in the reverse order of removal.
Rear outer handle removal/installation
1. Remove the rear door glass.
2. Remove the rear door unit.
3. Remove the rear door latch.
4. Remove the bolts.
5. Detach the rear outer handle and rear door latch rod.
6. With the rear side o ...
Regulator handle removal
Remove the regulator handle clip using a rag as shown.
...
Other materials:
Mazda 6 Service Manual: Heater core inspection
1. Remove the A/C unit. (See A/C UNIT REMOVAL/INSTALLATION.)
2. Remove the heater core from the A/C unit.
3. Inspect for cracks, damage, and coolant leakage.
If any problems are found, replace the heater core.
4. Inspect for bent fins.
If any are bent, use a flathead screwdriver to stra ...
Mazda 6 Service Manual: Control Switches
Temperature control dial
This dial controls temperature. Turn it clockwise for hot and counterclockwise
for cold.
NOTE
When the mode is set to or
with the fan control dial in a
position other than 0 and the temperature control dial in the maximum cold position,
the air intake selector sw ...