Mazda 6 Service Manual: Magnetic clutch inspection
1. Connect battery positive voltage to terminal A of magnetic clutch and ground to A/C compressor body.
2. Verify that the magnetic clutch operates.
- If not as specified, replace the stator and thermal protector.
Magnetic clutch adjustment
1. Measure the clearance around the entire circumference between the pressure
plate and A/C compressor pulley using a thickness gauge.
2. Verify that the clearance is within the specification.
...
Solar radiation sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the solar radiation sensor from the dashboard using a tape-wrapped
flathead screwdriver.
3. Install in the reverse order of removal. ...
Other materials:
Mazda 6 Service Manual: Idle air control (iac) valve inspection
Note
Perform the following inspection only when directed.
Operation Test
Carry out the Idle Air Control Inspection. (See Idle Air Control System
Inspection.)
If not as specified, perform the further inspection for the IAC valve.
Resistance Inspection
1. Disconnect the negative batt ...
Mazda 6 Service Manual: How to use USB mode
This unit does not support a USB 3.0 device. In addition, other devices may not
be supported depending on the model or OS version.
USB devices formatted to FAT32 are supported (USB devices formatted to other
formats such as NTFS are not supported).
Playback
1. Select the icon on the home
...