Diagnostic procedure
Mazda 6 Service Manual: Condenser removal/installation
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See RECOVERY.) (See CHARGING.)
3. Remove the shroud panel. (See SHROUD PANEL REMOVAL/INSTALLATION.)
Caution
If moisture or foreign material enters the refrigeration cycle,
cooling ability will be lower ...
Mazda 6 Service Manual: Woofer inspection
1. Inspect for continuity between the audio amplifier connector terminals and
woofer connector terminals using an ohmmeter.
If not as specified, replace the related wiring harnesses.
2. Verify that there is battery positive voltage at the woofer connector
terminal A (4SD) or C (5HB) u ...