Mazda 6 Service Manual: No.6 both abs warning light and brake system warning light stay on more than 4 seconds with ignition switch on
Diagnostic procedure
No.5 tcs off light does not illuminate with ignition switch on
Diagnostic procedure
When performing an asterisked (*) troubleshooting inspection, shake the
wiring harness and connectors while doing the inspection to discover whether
poor contact p ...
No.7 abs warning light stays on more than 4 seconds with ignition switch on
Diagnostic procedure
When performing an asterisked (*) troubleshooting inspection, shake the
wiring harness and connectors while doing the inspection to discover whether
poor contact poi ...
Other materials:
Mazda 6 Service Manual: Manifold absolute pressure (map) sensor inspection
Note
Perform the following inspection only when directed.
The following vacuum values are indicated by relative pressure
from the MAP sensor.
1. Connect the SSTs (WDS or equivalent) to the DLC-2.
2. Turn the ignition switch to ON (Engine OFF).
3. Select MAP PID on the SSTs (WDS or equi ...
Mazda 6 Service Manual: Operating Tips for USB device
This unit plays audio files as follows:
CAUTION
Do not use an audio file extension on files other than audio files. In addition,
do not change the audio file extension. Otherwise, the unit will not recognize the
file correctly resulting in noise or a malfunction.
NOTE
Playback may not b ...