Mazda 6 Service Manual: Nonreturn valve inspection
1. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION.)
2. Siphon the fuel from the fuel tank.
Note
- Nonreturn valve is integrated in the fuel tank.
- The nonreturn valve is normally closed by the spring force.
3. Verify that the nonreturn valve is closed.
- If the nonreturn valve is stuck open and dose not open even when pulled up by a finger, replace the fuel tank.
Fuel tank inspection
Caution
Disconnecting/connecting the quick release connector without
cleaning it may possibly cause damage to the fuel pipe and quick release
connector. Always clean the quick release connec ...
Fuel line pressure inspection
Warning
Fuel line spills and leakage are dangerous. Fuel can ignite and
cause serious injuries or death. Fuel can also irritate skin and eyes. To
prevent this, always complete the BEFORE REP ...
Other materials:
Mazda 6 Service Manual: Checking Tire Pressure
1. When you check the air pressure, make sure the tires are cold —meaning they
are not hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release ...
Mazda 6 Service Manual: Sas unit removal/installation
Warning
Handling the SAS unit improperly can accidentally deploy the air
bag modules and pre-tensioner seat belt, which may seriously injure you.
Read AIR BAG SYSTEM SERVICE WARNINGS before handling the SAS unit. (See
SERVICE WARNINGS.)
Caution
When replacing the SAS unit, config ...