Mazda 6 Service Manual: Oil pressure switch removal/installation
Warning
- When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait untill they are cool before replacing ATF.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Disconnect the cord assembly connector.
4. Remove the oil pressure switch.
5. Install the oil pressure switch.
Tightening torque 17.1-22.1N·m {1.75-2.25kgf·m, 13-16ft·lbf}
6. Connect the oil pressure switch connector.
7. Install the under cover.
8. Connect the negative battery cable.
Oil pressure switch inspection
Caution
Water or foreign objects entering the connector can cause poor
connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
On-veh ...
Input/turbine speed sensor inspection
Caution
Water or foreign objects entering the connector can cause a poor
connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
1. D ...
Other materials:
Mazda 6 Service Manual: Event Data Recorder
Event Data Recorder (U.S.A. and Canada)
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road obstacle, data that will assist in understanding
how a v ...
Mazda 6 Service Manual: Indication on Display
The Distance Recognition Support System (DRSS) operation status is indicated
in the active driving display or multi-information display. Regarding malfunctions,
check the vehicle conditions or have it inspected by an Authorized Mazda Dealer
according to the content of the displayed message.
R ...