Mazda 6 Service Manual: On-board diagnostic
- Diagnostic trouble code number inspection
- Dtc 02
- Dtc 06
- Dtc 07
- Dtc 10
- Dtc 11
- Dtc 12
- Dtc 13
- Dtc 14
- Dtc 15
- Dtc 18
- Dtc 19
- Dtc 21
- Dtc 22
- Dtc 58
- Dtc 59
- Dtc 02, 18, 21 (when two or more dtcs are indicated at the same time)
- Dtc 06, 10, 12, 14, 18, 21 (when two or more dtcs are indicated at the same
time)
- Dtc 07, 11, 13, 15, 19, 22 (when two or more dtcs are indicated at the same
time)
- Dtc 19, 22 (when two or more dtcs are indicated at the same time)
1. Remove the climate control unit.
2. Inspect for continuity between the defroster switch terminals using an
ohmmeter.
If not as specified, replace the climate control unit.
...
1. Remove the glove compartment.
2. Short the A/C check connector to the GND terminal using a jumper wire.
3. Shine a 60 W incandescent light from a height of approximately
100 mm {3.9 in} ont ...
Other materials:
Mazda 6 Service Manual: Wiper Blades
CAUTION
Hot waxes applied by automatic car washers have been known to affect
the wiper's ability to clean windows.
To prevent damage to the wiper blades, do not use gasoline, kerosene,
paint thinner, or other solvents on or near them.
When the wiper lever is in the AUTO position and th ...
Mazda 6 Service Manual: Instrument cluster removal/installation
Caution
When replacing the instrument cluster, the configuration procedure must be
performed before removing the instrument cluster. If the configuration procedure
is not performed before removing the instrument cluster, it is possible that the
instrument cluster will not operate normally. ...