Mazda 6 manuals

Mazda 6 Owners Manual: Personalization Features

Mazda 6 Owners Manual / Specifications / Personalization Features

The following personalization features can be set or changed by the customer or an Authorized Mazda Dealer. Consult an Authorized Mazda Dealer for details.

Additionally, some of the personalization features can be changed by the customer depending on the feature.

Personalization features and settings which can be changed differ depending on the market and specification.

Settings Change Method

1. Settings can be changed by operating the center display screen.

A: Refer to Settings.

B: Refer to Fuel Economy Monitor.

C: Refer to Active Driving Display.

2. Settings can be changed by operating the vehicle switches.

D: Refer to Auto Lock/Unlock Function.

E: Refer to Transmitter.

F: Refer to Locking, Unlocking with Request Switch (With the advanced keyless function).

3. Settings can be changed by an Authorized Mazda Dealer.







*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.

*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

*3 This system functions only when the navigation system is functioning.

*4 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent
operation.

*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:

*6 When set to Off, the lights-on reminder is operable.

*7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when the auto headlight function is set to Off. Refer to Lights-On Reminder.

*8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of the rear window defogger has been changed to Continuous.

*9 Change the ambient light illumination level with the parking lights or headlights turned on.

*10 When set to OFF, the ambient lights remain turned off regardless of whether of not the parking lights or headlights are on or off. However, they will turn on or off in conjunction with the illuminated entry system.

*11 Available only in display from the center display.

Specifications
Engine Electrical System *1 Q-85 is designed for i-ELOOP system. Only Q-85 should be used to ensure correct operation of i-ELOOP system. Consult an Authorized Mazda Dealer for details. *2 Not ...

Mazda 6 Service Manual
 ...

Other materials:

Mazda 6 Owners Manual: Power window main switch inspection
Drivers side 1. Remove the driver-side front door trim. 2. Connect the power window main switch connector. 3. Measure the voltage at the power window main switch terminals as indicated below. 4. Disconnect the power window main switch connector before inspecting for continuity at terminals 1 ...

Mazda 6 Owners Manual: Transmitter battery inspection
Caution Since the battery voltage does not drop fully if the button is pushed for only 4 seconds or less, it can not be properly examined to see whether it is good or bad. Always push the button for 5 seconds. Note A correct measurement can not be obtained if the battery temperat ...

© 2016-2024 Copyright www.mazda6info.net