Mazda 6 manuals

Mazda 6 Service Manual: Power outside mirror removal/installation

Mazda 6 Service Manual / Body / Outside mirror / Power outside mirror removal/installation

1. Disconnect the negative battery cable.

2. Remove the inner garnish.

3. Remove the front door trim.

4. Disconnect the power outside mirror connector.


5. Remove the screws and the mirror retention clips.

6. Remove the power outside mirror.

7. Install in the reverse order of removal.

Outside mirror
...

Power outside mirror disassembly/assembly
1. Disassemble in the order indicated in the table. 2. Assemble in the reverse order of disassembly. Outside Mirror Glass Disassembly Note 1. Press area A of the glass so that area B moves towa ...

Other materials:

Mazda 6 Service Manual: Purge solenoid valve inspection
Airflow Inspection Note Perform the following test only when directed. 1. Disconnect the negative battery cable. 2. Remove the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION.) 3. Inspect airflow between the ports under the following conditions. If not as specifi ...

Mazda 6 Service Manual: Engine oil replacement
Warning Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil has cooled. A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never work around or ...

© 2016-2022 Copyright www.mazda6info.net