Mazda 6 manuals

Mazda 6 Service Manual: Rear door lock actuator inspection

Mazda 6 Service Manual / Body / Power door lock system / Rear door lock actuator inspection

Door Lock Actuator

1. Disconnect the front door lock actuator connector.

2. Apply battery positive voltage to the front door lock actuator terminals and inspect the operation of the front door lock actuator.


With double locking system


Without double locking system


Door Lock-link Switch (With Theft-deterrent System

1. Disconnect the front door lock actuator connector.

2. Inspect for continuity between the door lock-link switch terminals using an ohmmeter.



Front door lock actuator inspection
Door Lock Actuator 1. Disconnect the front door lock actuator connector. 2. Apply battery positive voltage to the front door lock actuator terminals and inspect the operation of the front door loc ...

Trunk lid lock actuator inspection
1. Disconnect the trunk lid lock actuator connector. 2. Apply battery positive voltage to the trunk lid lock actuator terminals and inspect the operation of the trunk lid lock actuator. If not ...

Other materials:

Mazda 6 Service Manual: Oil cooler flushing
Note The contaminated cooler line (oil pipes and hoses) and auxiliary cooler must be flushed completely when ATX is overhauled or replaced. 1. Remove the two oil cooler line hoses and apply air pressure of 196 kPa {2.0 kgf/cm2, 28 psi} from the return hose (pipe) side. Caution Power ...

Mazda 6 Service Manual: Transaxle range (tr) switch removal/installation
1. Disconnect the negative battery cable. 2. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.) Caution Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector w ...

© 2016-2024 Copyright www.mazda6info.net