Mazda 6 Service Manual: Rear side seat belt removal/installation
Caution
- The ELR has a spring that will unwind if the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
4SD
1. Fold the rear seat back.
2. Remove the rear side seats.
3. Remove the rear package trim.
4. Remove the bolts.
5. Remove the rear seat belt.
6. Install in the reverse order of removal.
5HB
Note
- Rear side seat belts are embedded in the rear seat back. See rear seat disassembly/assembly, remove/install the rear center seat belt.
Front seat belt removal/installation
Warning
Handling the front seat belt (pre-tensioner seat belt) improperly
can accidentally deploy the pre-tensioner, which may seriously injure you.
Read SERVICE WARNINGS before handling the ...
Rear center seat belt removal/installation
Caution
The ELR has a spring that will unwind if the retractor's cover is
removed. The spring cannot be rewound by hand. If this occurs, the ELR will
not work properly. Therefore, do not dis ...
Other materials:
Mazda 6 Service Manual: Electric Parking Brake
The electric parking brake equipment applies the parking brake using an electric
motor. When the electric parking brake is applied, the electric parking brake switch
indicator light turns on.
WARNING
Do not drive the vehicle with the electric parking brake applied:
If the vehicle is driven ...
Mazda 6 Service Manual: Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue gauge indicates that the engine
coolant temperature is low, and the red gauge indicates that the engine coolant
temperature is high and overheating.
CAUTION
If the high engine coolant temperature warning light (red) turns on, there
is a pos ...