Mazda 6 Service Manual: Rear window defroster

Base installation

1. Cut away all of the original sealant using a razor. 2. Clean and degrease the ceramic coating on the glass and the base. 3. Apply primer to the bonding area of the glass and the base. Caution ...

Filament repair

1. Use isopropyl alcohol to clean around the damaged section of the filament. 2. Attach tape above and below the damaged section of the filament. 3. Using a small brush or marking pen, repair the ...

Other materials:

Mazda 6 Service Manual: Parking brake (lever type) adjustment
1. Start the engine and depress the brake pedal several times. 2. Stop the engine. 3. Remove the ashtray behind the center console. 4. Turn the adjusting nut as shown in the figure. 5. After adjustment, inspect the following points: (1) Turn the ignition switch to ON, pull the parking brak ...

Mazda 6 Service Manual: Outside the United States/Canada
Government regulations in the United States/Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States/Canada may differ from those sold in other countries. The differences may make it difficult or even impossi ...