Mazda 6 Owners Manual: Relay inspection
Relay Type
Four-terminal
Type A
1. Remove the relay.
2. Inspect for continuity between the relay terminals using an ohmmeter.
If not as specified, replace the relay.
Type B
1. Remove the relay.
2. Inspect for continuity between the relay terminals using an ohmmeter.
If not as ...
Mazda 6 Owners Manual: A-pillar trim removal
1. Turn the seaming welt over.
2. Disengage clips A using a fastener remover.
3. Pull the A-pillar trim, then disengage clip B (1).
4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar
trim (2).
5. Pull clip B out, then rotate 45°.
6. Remove clip B from the grommet b ...