Mazda 6 manuals

Mazda 6 Service Manual: Seat warmer switch inspection

Mazda 6 Service Manual / Body / Seat / Seat warmer switch inspection

1. Remove the seat warmer switch.

2. Inspect for continuity between the seat warmer switch terminals using an ohmmeter.

Drivers side



Passengers side



Seat warmer switch removal/installation
1. Disconnect the negative battery cable. 2. Remove the brake boots panel. (See CONSOLE REMOVAL/INSTALLATION.) 3. Remove in the order indicated in the table. 4. Install in the reverse order of ...

Seat warmer unit inspection
1. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.) 2. Remove the seat cushion trim. 3. While inspecting for continuity between the terminals A and B of the connector, use a dryer to ...

Other materials:

Mazda 6 Service Manual: Tiedown Hooks (Some models)
CAUTION Do not use the front and rear tiedown eyelets for towing the vehicle. They have been designed only for securing the vehicle to a transport vessel during shipping. Using the eyelets for any other purpose could result in the vehicle being damaged. Tiedown Hooks 1. Remove the tiedown eye ...

Mazda 6 Service Manual: Transaxle oil replacement
1. Remove the drain plug with the washer. 2. Drain the oil into a suitable container. 3. Install a new washer and the drain plug. Tightening torque 40-58 N·m {4.0-6.0 kgf·m, 29-43 ft·lbf} 4. Remove the oil level plug with washer and add nthe specified amount and type of oil through t ...

© 2016-2024 Copyright www.mazda6info.net