Mazda 6 Service Manual: Shock absorbing pad removal/installation
1. Remove the headliner.
2. Remove the fastener, then remove the shock absorbing pad.
3. Install in the reverse order of removal.
Headliner removal/installation
1. Disconnect the negative battery cable.
2. Turn the seaming welt and weatherstrip over.
3. Remove the sunroof seaming welt. (vehicles with sunroof only)
4. Remove the A-pillar trims.
5. Remove t ...
Assist handle removal/installation
1. Insert a screwdriver into the assist handle notch and remove the assist
handle cover.
2. Pull the assist handle forward you, then remove the assist handle.
3. Install in the reverse order o ...
Other materials:
Mazda 6 Service Manual: Snow Tires
Use snow tires on all four wheels
Do not go faster than 120 km/h (75 mph) while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi) more than recommended on the tire pressure
label (driver's door frame), but never more than the maximum cold-tire pressure
shown on the tir ...
Mazda 6 Service Manual: Intake air temperature (iat) sensor inspection
Resistance Inspection
Note
Perform the following inspection only when directed.
1. Disconnect MAF/IAT sensor.
2. Measure the resistance between the MAF/IAT sensor terminals D and E using
an ohmmeter.
If not as specified, replace the MAF/IAT sensor.
If the MAF/IAT sensor is okay, but ...