Mazda 6 Service Manual: Stay damper disposal
Note
- The gas in the stay damper is colorless, odorless, and non-toxic.
1. Wear protective eye wear.
2. Lay the stay damper flat.
3. Saw through the stay damper body using a hacksaw.
4. Allow the gas to escape from the stay damper.
5. Discard the stay damper.
Trunk lid adjustment
1. Measure the gap and height between the front door and the body.
2. If not as specified, loosen the door hinge installation bolts or the door
lock striker installation screws, and reposition the ...
Liftgate
...
Other materials:
Mazda 6 Service Manual: Locking, Unlocking with Auxiliary Key
Turn the auxiliary key toward the front to lock, toward the back to unlock.
To lock
All doors lock automatically when the driver's door is locked using the auxiliary
key.
To unlock
The driver’s door unlocks when the auxiliary key is turned briefly to the unlock
position and then immediatel ...
Mazda 6 Service Manual: Selector cable adjustment
1. Remove the center console.
2. Shift the selector lever to P position.
3. Unlock the lock piece of the selector cable (selector lever side) in the
order shown in the figure.
4. Verify that the manual shaft is in P position.
5. Lock the lock piece of the selector cable (selector lever side) ...