Mazda 6 manuals

Mazda 6 Service Manual: Steering shaft inspection

1. Inspect the following.


(1) Column bearing for damage

(2) Steering shaft length

  • Replace the steering shaft component as necessary.

Length
211.6 mm {8.3 in}

2. Inspect the tilt and telescope operation


(1) Verify that the adjusting lever moves smoothly from unlock position to lock position.

(2) Verify that the steering shaft is fixed firmly when the adjusting lever is locked.

  • Replace the steering shaft component as necessary.
Steering wheel and column removal/installation
Warning Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read AIR BAG SYSTEM WARNINGS before handling the air bag module. (S ...

Steering gear and linkage removal/installation
Caution Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing ...

Other materials:

Mazda 6 Service Manual: Blind Spot Monitoring (BSM) (Some models)
The Blind Spot Monitoring (BSM) is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by notifying the driver of the presence of vehicles approaching from the rear in an adjacent lane. The Blind Spot Monitoring (BSM) detects vehicle ...

Mazda 6 Service Manual: Front door unit removal/installation
1. Remove the front door glass. 2. Remove the inner handle. 3. Remove the front door speaker. 4. Disconnect the power window motor connector, front door lock actuator connector, power outside mirror connector. 5. Remove the door harness from the front door unit. 6. Remove the bolts. 7. Rem ...

© 2016-2024 Copyright www.mazda6info.net