Mazda 6 Service Manual: Symptom troubleshooting
- Verify the symptoms, and perform troubleshooting according to the appropriate number.
Vehicles with ABS/TCS
Vehicles with DSC
*1 : DSC system contains traction control function, DSC indicator light goes on and off while DSC operates.
*2 : DSC indicator light goes on and off while DSC operates.
Vehicle with ABS/TCS
Vehicle with DSC
Precaution
Vehicles with ABS/TCS
1. The ABS warning light, BRAKE system warning light, TCS indicator light
and/or TCS OFF light illuminate even when the system is normal.
*1 : In cases where the light may ...
No.1 abs warning light, brake system warning light, tcs off light do not
illuminate with ignition switch on
Vehicle with ABS/TCS
When performing an asterisked (*) troubleshooting inspection, shake the
wiring harness and connectors while doing the inspection to discover whether
poor contact poi ...
Other materials:
Mazda 6 Service Manual: Selector lever inspection
1. Turn the ignition switch to ON (engine OFF).
2. With the brake pedal depressed, verify that there is a "click" at each
range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when shifted from P
position to L range.
5. Ver ...
Mazda 6 Service Manual: Starter inspection
On-vehicle Inspection
1. Verify that the battery is fully charged.
2. Crank the engine and verify that the starter rotates smoothly without any
noise.
If not, inspect the following.
- Remove the starter and inspect the magnetic switch and the starter.
- Inspect the related wiring har ...