Mazda 6 manuals

Mazda 6 Service Manual: Tcs (dsc) off switch removal/installation

Mazda 6 Service Manual / Braking system / Abs/tcs / Tcs (dsc) off switch removal/installation

1. Press the hooks of the TCS OFF switch and pull the switch out.

2. Disconnect the connector.


3. Install in the reverse order of removal.

Abs (abs/tcs) hu/cm inspection
1. Disconnect the negative battery cable. 2. Connect the SST between the ABS (ABS/TCS) HU/CM and harness connector with the ignition switch off. 3. Attach the tester leads to the SST and inspect ...

Tcs (dsc) off switch inspection
1. Remove the TCS OFF switch. 2. Inspect for continuity between the TCS OFF switch terminals using an ohmmeter. If not within the specification, replace the TCS OFF switch. ...

Other materials:

Mazda 6 Service Manual: Immobilizer System
The immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent vehicle theft. If you have a problem with the immobilizer system or the key, consult ...

Mazda 6 Service Manual: Power window motor inspection
Drivers Side 1. Disconnect the power window motor connector. 2. Apply battery positive voltage to the power window motor terminals E and F and inspect the operation the power window motor operation. If not as specified, replace the power window motor. 3. Apply battery positive voltage ...

© 2016-2024 Copyright www.mazda6info.net