Mazda 6 Service Manual: Torque formulas
- When using a torque wrench-SST
or equivalent combination, the written torque must be recalculated due to the extra length that the SST
or equivalent adds to the torque wrench.
Recalculate the torque using the following formulas. Choose the formula that applies to you.
A : The length of the SST
past the torque wrench drive
L : The length of the torque wrench
Hose clamps
When reinstalling, position the hose clamp in the original location on
the hose and squeeze the clamp lightly with large pliers to ensure a good
fit.
...
Vise
When using a vise, put protective plates in the jaws of the vise to
prevent damage to parts.
...
Other materials:
Mazda 6 Service Manual: Vehicle Loading
WARNING
Do not tow a trailer with this vehicle: Towing a trailer with this
vehicle is dangerous because it has not been designed to tow a trailer and doing
so will affect the drive system which could result in vehicle damage.
This section will guide you in the proper loading of your vehicle, t ...
Mazda 6 Service Manual: Oil control valve (ocv) removal/installation
L3
1. Disconnect the negative battery cable.
2. Remove the plug hole plate.
3. Remove the high-tension lead. (See HIGH-TENSION LEAD
REMOVAL/INSTALLATION.)
4. Remove the oil control valve (OCV) connector.
5. Remove the ventilation hose.
6. Remove the cylinder head cover. (See Cylinder Head Co ...