Mazda 6 Owners Manual: Traffic Sign Display Indication

Mazda 6 Owners Manual / When Driving / i-ACTIVSENSE / Traffic Sign Recognition System (TSR) (Some models) / Traffic Sign Display Indication

The following traffic signs are displayed on the active driving display.

Speed limit signs

Do not enter signs

Stop signs

The above indications are some examples.

NOTE

Speed limit signs

When the vehicle speed is about 1 km/h (0.6 mph) or faster, the speed limit sign is displayed when any one of the following conditions are met.
- The Forward Sensing Camera (FSC) recognizes a speed limit sign as a sign targeted for your vehicle and the vehicle passes it.
- The speed limit sign stored in the navigation system is read (if the Forward Sensing Camera (FSC) does not recognize a speed limit sign).
In the following cases, display of the speed limit sign stops.
- The Forward Sensing Camera (FSC) recognizes the speed limit sign and the vehicle is driven for a certain distance after passing the sign.
- Each sensor determines that the vehicle has changed direction of travel.
- The Forward Sensing Camera (FSC) recognizes a new speed limit sign which differs from the previous one (displays the new speed limit sign).
- The speed limit sign stored in the navigation system is not read within a certain period of time (if the Forward Sensing Camera (FSC) does not recognize a speed limit sign, the speed limit sign stored in the navigation system is displayed).
- The vehicle speed exceeds the displayed speed limit sign by 30 km/h (19 mph) or more after a certain period of time has elapsed since the speed limit sign was displayed.
  (Except when there is information for the speed limit sign in the navigation system)

Do not enter signs

A do not enter sign is displayed when all of the following conditions are met.
- The vehicle speed is about 60 km/h (37 mph) or slower.
- The Forward Sensing Camera (FSC) recognizes a do not enter sign as a sign targeted for your vehicle and the vehicle passes it.
In the following case, the display of the do not enter sign stops.
- The Forward Sensing Camera (FSC) recognizes the do not enter sign and a certain period of time has elapsed since the vehicle passed the sign.

Stop sign

A stop sign is displayed when all of the following conditions are met:
- The vehicle speed is about 30 km/h (19 mph) or slower.
- The Forward Sensing Camera (FSC) recognizes a stop sign as a sign targeted for your vehicle.
In the following cases, display of the stop sign stops.
A certain period of time has elapsed since the stop sign was displayed.

Traffic Sign Recognition System (TSR) (Some models)

The Traffic Sign Recognition System (TSR) helps prevent the driver from overlooking traffic signs, and provides support for safer driving by displaying traffic signs on the active driving display ...

Excessive Speed Warning

If the vehicle speed exceeds the speed limit sign displayed on the active driving display, the warning sound is activated and the area around the speed limit sign displayed on the active driving d ...

Other materials:

Mazda 6 Owners Manual: Seat belt inspection
Belt 1. Confirm that the seat belt is installed correctly. 2. Inspect the seat belt for damage and deformation of metal parts. If any damage is found, replace as necessary. ELR 1. Verify that the belt can be pulled out smoothly, and that it moves smoothly when wound. If not as specif ...

Mazda 6 Owners Manual: Essential Information
Introduction Be careful not to hurt yourself when inspecting your vehicle, replacing a tire, or doing some kind of maintenance such as car washing. In particular, wear thick work gloves such as cotton gloves when touching areas that are difficult to see while inspecting or working on your vehi ...