Mazda 6 manuals

Mazda 6 Service Manual: Transaxle oil replacement

1. Remove the drain plug with the washer.

2. Drain the oil into a suitable container.

3. Install a new washer and the drain plug.

Tightening torque 40-58 N·m {4.0-6.0 kgf·m, 29-43 ft·lbf}

4. Remove the oil level plug with washer and add nthe specified amount and type of oil through the oil level plug hole until the level reaches the bottom of the oil level plug hole.

Specified oil viscosity All-season: SAE 75W-90
Above 10 ° C {50 ° F}: SAE 80W-90 Capacity (approximate quantity) 2.87 L {3.03 US qt, 2.53 lmp qt}


5. Install a new washer and the oil level plug.

Tightening torque 40-58 N·m {4.0-6.0 kgf·m, 29-43 ft·lbf}

Transaxle oil inspection
1. Park the vehicle on level ground. 2. Remove the oil level plug and washer. 3. Verify that the oil is near the brim of the plug port. If the oil level is lower than the low level, add the spec ...

Oil seal (differential) replacement
1. On level ground, jack up the vehicle and support it evenly on safety stands. 2. Drain the oil from the transaxle. 3. Remove the front wheels and splash shields. 4. Separate the drive shaft and ...

Other materials:

Mazda 6 Service Manual: Heated Steering Wheel (Some models)
The grips on the left and right of the steering wheel can be warmed up. The ignition must be switched ON. Press the switch to turn on the heated steering wheel. The heated steering wheel operates for about 30 minutes and then turns off automatically. The indicator light illuminates when the h ...

Mazda 6 Service Manual: Glossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of m ...

© 2016-2024 Copyright www.mazda6info.net