Mazda 6 Owners Manual: Troubleshooting
Mazda Bluetooth® Hands-Free Customer Service
If you have any problems with Bluetooth®, contact our toll-free customer service center.
- U.S.A. Phone: 800-430-0153 (Toll-free) Web: www.MazdaUSA.com/bluetooth
- Canada Phone: 800-430-0153 (Toll-free) Web: www.mazdahandsfree.ca
- Mexico Center of Attention to Client (CAC) Phone: 01-800-01-MAZDA (Toll-free) Web: www.mazdamexico.com.mx
Bluetooth® Device pairing, connection problems
How to Use Stitcher™ Radio
What is Stitcher™ Radio?
Stitcher™*1 radio is an application which can be used to listen to Internet radio
or stream podcasts.
Recommended content is automatically selected by registering cont ...
Other materials:
Mazda 6 Owners Manual: Drive shaft (atx) disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Boot Band (Wheel Side) Disassembly Note
Note
The boot band does not need to be removed unless it is being replaced.
Remove the boot clamp with end clamp pliers as shown and discard the
cla ...
Mazda 6 Owners Manual: Liftgate side trim removal/installation
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and
the strap hanger from the body and pin B, hook C, D from the liftgate lower
trim.
4. Remove the liftgate side trim.
5. Remo ...
How to Use Stitcher™ Radio
What is Stitcher™ Radio?
Stitcher™*1 radio is an application which can be used to listen to Internet radio
or stream podcasts.
Recommended content is automatically selected by registering cont ...
Other materials:
Mazda 6 Owners Manual: Drive shaft (atx) disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Boot Band (Wheel Side) Disassembly Note
Note
The boot band does not need to be removed unless it is being replaced.
Remove the boot clamp with end clamp pliers as shown and discard the
cla ...
Mazda 6 Owners Manual: Liftgate side trim removal/installation
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and
the strap hanger from the body and pin B, hook C, D from the liftgate lower
trim.
4. Remove the liftgate side trim.
5. Remo ...