Mazda 6 Service Manual: Trunk lid disassembly/assembly
1. Disconnect the negative battery cable.
2. Remove the trunk lid trim.
3. To remove the trunk lid outer handle and trunk lid key cylinder, remove the rear finisher.
4. Disassemble in the order indicated in the table.
5. Assemble in the reverse order of disassembly.
Trunk lid removal/installation
Warning
Removing the stay damper without supporting the trunk lid can be
dangerous. The trunk lid may fall and injure you. Open the trunk lid fully
and support it before removing the stay da ...
Trunk lid adjustment
1. Measure the gap and height between the front door and the body.
2. If not as specified, loosen the door hinge installation bolts or the door
lock striker installation screws, and reposition the ...
Other materials:
Mazda 6 Service Manual: Oil pressure inspection
Warning
Continuous exposure to USED engine oil has caused skin cancer in
laboratory mice. Protect your skin by washing with soap and water
immediately after working with engine oil.
Hot engines and engine oil can cause severe burns. Turn off the
engine and wait until it and the engine ...
Mazda 6 Service Manual: Discharge headlight control unit removal/installation
Caution
Incorrect servicing of the discharge headlight control unit could
result in electrical shock. Before servicing the discharge headlight control
unit, always refer to the Discharge headlight service warnings. (See
DISCHARGE HEADLIGHT SERVICE WARNINGS)
When replacing the discharg ...