Mazda 6 Service Manual: Trunk side trim removal/installation
4SD
1. Remove the trunk end trim.
2. Remove the fasteners, then remove the trunk side trim.
3. Install in the reverse order of removal.
5HB
1. Remove the trunk end trim.
2. Remove the trunk side upper trim.
3. Remove the cargo hooks.
4. Remove the fasteners.
5. Pull the trunk side trim toward you, then disengage clips A from the body.
6. Install in the reverse order of removal.
Rear package trim removal/installation
1. Remove the high-mount brake light.
2. Fold the rear seat back.
3. Remove the fasteners.
4. Pull the rear package trim upward, then disengage the clips from the body.
5. Disengage the hooks, t ...
Trunk side upper trim removal/installation
1. Disconnect the negative battery cable. (LH only)
2. Remove the tire house trim.
3. Remove the rear seat remote lever.
4. Remove the screw.
5. Pull the trunk side upper trim toward you, then d ...
Other materials:
Mazda 6 Service Manual: Magnetic clutch disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
3. Adjust the magnetic clutch clearance. (See MAGNETIC CLUTCH ADJUSTMENT.)
Bolt Removal/Installation Note
1. When removing or installing the bolt, hold the pressure plate in place as
shown ...
Mazda 6 Service Manual: If You Must Use the Front Seat for Children
If you cannot put all children in the rear seat, at least put the smallest children
in the rear and be sure the largest child up front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint system on the front passenger seat whether
your vehicle is equipped with a o ...