Mazda 6 Service Manual: Two-step down function operative/non-operative switching procedure

Mazda 6 Service Manual / Body / Power window system / Two-step down function operative/non-operative switching procedure

Note

By following the procedure below, the two-step down function is switched to non-operative when it is operative, and to operative when it is non-operative.

Initial setting

Note A driver side window will not fully close automatically under following the conditions: - The battery has been disconnected during vehicle maintenance or for other reasons. - Th ...

Door glass position change procedure

Note After performing the following procedure, verify that the two-step down function operates normally and the door glass position has changed. If the two-step down function does not operat ...

Other materials:

Mazda 6 Service Manual: Abs (abs/tcs) hu/cm inspection
1. Disconnect the negative battery cable. 2. Connect the SST between the ABS (ABS/TCS) HU/CM and harness connector with the ignition switch off. 3. Attach the tester leads to the SST and inspect voltage referring the table below. Terminal Voltage Table (Reference) (Engine is idling, and co ...

Mazda 6 Service Manual: Front door lock actuator inspection
Door Lock Actuator 1. Disconnect the front door lock actuator connector. 2. Apply battery positive voltage to the front door lock actuator terminals and inspect the operation of the front door lock actuator. If not as specified, replace the front door lock actuator. With double locking ...