Mazda 6 Service Manual: Variable air duct (vad) shutter valve inspection (l3)
1. Remove the air cleaner case. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)
2. Disconnect the vacuum hose from the VAD shutter valve actuator.
3. Connect a vacuum pump to the VAD shutter valve actuator.
4. Apply vacuum and verify that the rod moves.
- If the rod dose not move, replace the air cleaner.
Intake-air system removal/installation
Warning
When the engine and intake-air system are hot, they can badly
burn. Turn off the engine and wait until they are cool before removing the
intake-air system.
Fuel vapor is hazardous. ...
Variable air duct (vad) control solenoid valve inspection (l3)
1. Remove the VAD control solenoid valve. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
2. Inspect airflow between the ports under the following conditions.
If not as specified, replace the VAD ...
Other materials:
Mazda 6 Service Manual: STEP 3: Contact Better Business Bureau (BBB)
Mazda North American Operations realizes that mutual agreement on some issues
may not be possible. As a final step to ensure that your concerns are being fairly
considered, Mazda North American Operations has agreed to participate in a dispute
settlement program administered by the Better Busi ...
Mazda 6 Service Manual: Auto leveling control unit configuration
1. Connect the SST (WDS or equivalent) to the DLC-2.
2. Input vehicle information following the directions on the screen.
3. Select Module programming.
4. Select Programmable module installation.
5. When performing configuration corresponding to each auto leveling control
unit, select the fo ...